"Every other alteration on a suit is safe. Slimming the body, shortening the sleeve, hemming the trouser — done badly, they're disappointing. Shoulder work done badly isn't disappointing. It's permanent. The shoulder is the anchor of the whole jacket, and once you've re-set it wrong, everything else has to fight the mistake."
Book suit jacket shoulder reduction and shoulder alteration with free door-to-door pickup anywhere in Nairobi. Shoulder width narrowing, shoulder slimming, shoulder slope correction, padding reduction and removal, shoulder pad replacement, sleeve head re-set by hand, full shoulder restructuring. Every jacket handled personally by David Ochieng in our Industrial Area workshop, with 14 years of tailoring behind each stitch.
If you're looking for a shoulder reduction tailor in Nairobi, or you simply need a suit jacket narrowed at the shoulders with free pickup, we can help. Send a photo on WhatsApp and we'll tell you honestly whether your jacket can take the change — in minutes, during working hours.
Book directly with David
Tap to open the contact page — a photo on WhatsApp gets you a free quote in minutes.
A shoulder alteration takes several days of careful hand-work. We collect from your home or office anywhere in Nairobi, on a suit hanger, and return it the same way.
Every tailor who works on suits knows the same thing: the shoulder is the anchor. If the shoulders fit, everything else on the jacket can be adjusted to fit the wearer. If the shoulders don't fit, no amount of other work will make the jacket look right. That's the reason shoulder reduction is a specialist job — and the reason most Nairobi tailors will tell a client honestly that they can't do it, rather than take the money and risk ruining the jacket.
When we slim the body of a jacket, the new seam runs parallel to the old one and hides it — the old needle holes sit under the new seam and nothing shows. When we shorten a sleeve, the same applies — the old cuff marks sit under the new cuff and nothing shows. The shoulder seam is different. When we reduce the shoulder width, the shoulder seam has to move inward by 1 to 2 centimetres. The old seam line is now visible as a faint row of needle holes inside the new seam, closer to the neck. On dense, felted wool — the classic suit cloth — the holes close up within a few days because the fibres swell. On looser or lighter cloth, they don't close as well, and on a very pale suit they can show as a faint stitched line just inside the new shoulder. This is why shoulder reduction should never be the first alteration attempted on a suit — and why the client has to accept the small risk before we start.
The sleeve head is the part of the sleeve that joins the shoulder — a curved, gathered piece of cloth that sits over the top of the shoulder and lets the sleeve roll naturally as the wearer moves. When we reduce the shoulder width, the sleeve head has to come out entirely, and then be re-set by hand at the new position. This is a hand job — a machine cannot reproduce the soft roll of a properly set sleeve head because the head needs deliberate, uneven "ease" (a small amount of extra fullness) that a machine can't distribute. On a canvased jacket, the shoulder canvas inside also has to be trimmed and re-stitched by hand to match the new width. A shoulder reduction on a canvased jacket takes four to six hours of bench work, most of it with a hand needle.
Most suit jackets have some shoulder padding — usually a thin layer of wadding or foam that gives the shoulder a little structure. On a well-made jacket, the padding is shaped to match the shoulder curve. When we reduce the shoulder width, the padding has to be re-cut to the new shape — sometimes with the same padding material, sometimes replaced entirely if the original was bonded and won't re-cut cleanly. On jackets with very light padding or no padding at all (common on Italian and Neapolitan tailoring), this step is quick. On heavy-padded British-style jackets, the padding replacement is a significant part of the job and adds to the price.
The armhole is the opening in the jacket where the sleeve is set. When you reduce the shoulder width, the armhole has to move inward with it — otherwise the armhole sits too far out and the sleeve hangs wrong. On some jackets, the armhole can be re-cut to the new position cleanly. On others — especially jackets with hand-set sleeve heads and finished armholes — re-cutting is not possible without leaving visible marks on the surrounding cloth. We check this on every shoulder reduction before we agree to the job. If the armhole can't be adjusted cleanly, we tell the client that the shoulder reduction isn't worth doing on that particular jacket.
Shoulder reduction is not like slimming — you can't take in 5 centimetres and expect the jacket to still look like a jacket. On a standard suit, the maximum clean reduction is about 1.5 to 2 centimetres per side (3 to 4 centimetres total). Reduce more than that and the armhole has to move so far inward that the sleeve ends up too narrow for the arm, and the chest panel no longer fits properly around the body. On a heavily structured jacket or one with reinforced shoulders, the limit is often lower — sometimes just 1 centimetre per side. We measure the actual limit on every jacket before committing to the work, and we tell the client upfront if the jacket can only take a smaller reduction than they want. A smaller reduction that keeps the jacket wearable is better than a larger one that ruins it.
A shoulder reduction at KSh 3,500 is the most expensive single jacket alteration we do — more than sleeve shortening, more than body slimming, more than a hem. That's not because we're expensive; it's because the work is genuinely that slow. It takes four to six hours of hand-bench time. It also has a hard risk: if it's done wrong, the jacket can't be un-done. We turn down shoulder reduction jobs every month — because the jacket's armhole can't be re-cut cleanly, or the client wants a 3-centimetre reduction the jacket can't take, or the previous tailor has already compromised the shoulder seam. On the jackets that can take it, the result is transformative. It's the same standard we hold on suit alterations and blazer alterations.
A fused suit jacket with no canvas and a full-canvased Italian jacket with hand-set shoulders require completely different handling. If a tailor treats them the same way, one of them will be ruined. Here's how we categorise suit shoulders before deciding what technique to use.
Most suits from market suppliers, fast-fashion and mid-tier retail. The shoulder area is fused — a layer of heat-activated adhesive holds the interlining to the front panel rather than a floating canvas. Padding is often a thin layer of bonded foam, sometimes shaped to the shoulder curve but usually a single piece. No hand-work at the shoulder. Common in Nairobi retail between KSh 8,000 and KSh 20,000.
What we do differentlyOn a fused shoulder, the padding can be re-cut but not always re-shaped — the foam is bonded and can't be steamed into a new curve the way a horsehair pad can. On this tier, we usually replace the padding with a new piece rather than trying to reuse the original. The shoulder seam is machine-stitched at the new position, and the visible old seam marks often close well on dense poly-wool blends. Fused shoulders usually take a 1 to 1.5 cm reduction per side cleanly.
Suits from SuitSupply, Boggi, mid-range Italian and better regional makers. The chest is canvased (a floating horsehair layer), and the shoulders are half-canvased. The sleeve head is set by hand, sometimes with a small amount of deliberate "ease". The shoulder padding is a shaped horsehair or wool pad. The armhole is hand-finished on better examples. Common in Nairobi retail between KSh 25,000 and KSh 60,000.
What we do differentlyOn this tier the canvas has to be hand-trimmed and re-set at the new shoulder width. The sleeve head is re-set by hand — no machine work at the shoulder. We re-shape the horsehair padding to match the new shoulder curve by pressing it over a ham rather than replacing it. The visible old seam line usually closes within a week on quality wool — the cloth swells back. A 1.5 to 2 cm reduction per side is possible if the armhole can be adjusted cleanly.
Full-canvased jackets from Italian, British and Japanese makers — Zegna, Canali, Brioni, Huntsman, Ring Jacket. Hand-set sleeve heads with a specific, deliberately uneven "ease". Hand-stitched shoulder canvas. Hand-finished armholes. Shaped horsehair padding that's press-formed to the wearer's shoulder curve. The shoulder is the single most important hand-finished element of the jacket. Common above KSh 90,000.
What we do differentlyOn this tier every part of the shoulder work is hand-finished. We re-set the sleeve head by hand at the new position and match the original "ease" — a small, deliberate unevenness in the sleeve head that machine work cannot reproduce. We hand-trim the canvas, hand-press the padding over a ham, and hand-finish every seam. This takes a full day, sometimes more. On a KSh 90,000 jacket, shoulder reduction is the most demanding alteration we do — and the one we're proudest of when it goes right.
If you're not sure which tier your suit falls into, send a photo of the inside front panel (canvas is often visible behind the lining) and one of the shoulder line from the front and back on WhatsApp. We'll tell you from the construction how the reduction should be handled.
A shoulder seam should sit exactly on the edge of your bone. When it doesn't, the whole jacket looks borrowed. These are real clients, real jackets, and the exact shoulder work we performed.
We know the temptation. You bought a suit jacket that is slightly too wide at the shoulders, or you found a vintage blazer you love but it swallows your frame. You walk past a tailoring stall and see a sign: "Shoulder Narrowing – KSh 1,500." You think, "It's just taking in a seam. How hard can it be?" You hand over the jacket to save a few thousand shillings. A week later, you wear it to a meeting, and the jacket is ruined. The shoulder seam is puckered. The sleeve head is flat and collapsed. The collar is gaping at the back. You didn't save money. You just destroyed a garment.
At FitFix Clothes Alterations, we have spent fourteen years fixing the mistakes of "cheap" tailors on shoulder reductions. We have seen it all: sleeves cut from the wrong end entirely; canvases that were glued flat; armholes that were reduced so much the client couldn't lift their arms. This is not about insulting other tailors. It is about educating you on the structural mechanics of a suit shoulder, the hard limits of what cloth can do, and why paying a premium for a specialist tailor in Nairobi to hand-set the sleeve head and re-shape the canvas is the smartest financial decision you can make for your wardrobe.
When you pay KSh 1,500 for a shoulder reduction, the tailor is operating on a razor-thin margin. To make a profit, they have to finish your jacket in 30 minutes. They cannot afford to unpick the sleeve head. They cannot afford to hand-trim the canvas. Here is what happens on a micro-level when a shoulder is rushed through a cheap alteration.
A proper tailor unpicks the entire sleeve head by hand, moves the shoulder seam, and then hand-stitches the sleeve head back into place. This creates a soft, natural roll. A cheap tailor just runs the whole shoulder seam through a sewing machine. The result? The sleeve head is locked in place. It looks flat, rigid, and unnatural. When you move your arms, the jacket pulls like a straightjacket. It screams "cheap alteration."
When you reduce the shoulder width, you change the geometry of the entire upper jacket. If the tailor doesn't know what they are doing, the back of the collar will pull away from your neck, creating a gaping hole when you move. They didn't adjust the shoulder slope or the neckline to compensate for the new width. A professional tailor re-sets the collar alignment when reducing the shoulders.
If your jacket is too wide at the shoulders, a cheap tailor will just cut into the armhole and pull the sleeve inward. The problem? The armhole is the hole your arm goes through. If you make it smaller, your arm no longer fits.
On a poorly executed shoulder reduction, the client ends up with a jacket that fits their shoulders but cuts off circulation to their arms. They can't drive, they can't type, they can't even lift a glass of water comfortably. A professional tailor knows that on many jackets, the armhole cannot be reduced more than a certain amount. We check this limit before we even quote the job.
A cheap tailor will often just slice off the extra padding without re-shaping it. They leave the shoulder flat and lifeless. A professional tailor replaces the padding with a new shaped horsehair pad, carefully pressed over a ham to match the new, narrower curve of your shoulder.
"I brought a vintage blazer to a cheap tailor to get the shoulders narrowed. When I got it back, the shoulders were indeed narrower, but the armholes were so tight I couldn't move my arms, and the sleeve heads were completely flat. It looked like a child's jacket. I brought it to David at FitFix. He told me the armhole reduction was permanent and there was nothing he could do about the tightness, but he managed to re-set the sleeve heads to give it some shape back. He saved the jacket, but it cost me double what I would have paid if I had just come to FitFix first." — Mark W., Kilimani
We don't expect you to take our word for it. Here is a detailed, side-by-side breakdown of the shoulder reduction process. Look at what a cheap tailor does, and compare it to what happens on our bench in Industrial Area.
| The Alteration Step | The Cheap Tailor (KSh 1,500) | The FitFix Standard (KSh 3,500+) |
|---|---|---|
| The Sleeve Head |
The Method: Machine-stitches the sleeve head flat to the shoulder seam. Ignores the "ease." The Result: The shoulder looks rigid, flat, and unnatural. It pulls awkwardly when you move your arms. |
The Method: We unpick the sleeve head, re-set it by hand at the new position, and manually distribute the "ease" for a natural roll. The Result: The sleeve head looks factory-made. It moves with your arm naturally and retains the bespoke drape. |
| The Internal Canvas |
The Method: Slices through the canvas to take in the shoulder. Doesn't re-anchor it. The Result: The jacket loses its structure and shape. The chest ripples. The jacket is permanently ruined. |
The Method: We open the shoulder, hand-trim the floating canvas to the new width, and hand-stitch it back in place. The Result: The jacket retains its structure. The canvas molds to your new shoulder width over time. |
| The Armhole |
The Method: Reduces the armhole aggressively to match the new shoulder width, without checking the limit. The Result: The armhole becomes a death grip. You cannot lift your arms or drive a car. |
The Method: We measure the safe limit of the armhole. If it can't be re-cut cleanly, we tell you upfront that the jacket cannot be reduced as much as you want. The Result: You have full mobility. The jacket fits the shoulders without being a straightjacket. |
| The Padding |
The Method: Cuts off the excess foam with scissors and leaves a raw, flat edge. The Result: The shoulder feels hard, lumpy, or collapses entirely. It looks cheap. |
The Method: We remove the old padding and fit a new shaped horsehair pad, pressed over a ham to create a soft, natural curve. The Result: The shoulder has structure but feels soft and natural. The silhouette is enhanced. |
Don't let a cheap alteration ruin an expensive jacket. Send us a photo on WhatsApp for a free, no-obligation assessment before you hand your jacket to anyone else: 0705 728 896.
We are not the cheapest tailor in Nairobi. We do not want to be. We are the tailor you call when you have a jacket that you love, and you want the shoulders fixed properly.
But here is the truth: we turn down shoulder reduction jobs every single month. Why? Because the honest answer for some jackets is that the job cannot be done cleanly.
If the armhole is too small, or the jacket is made of delicate summer silk that will show every needle hole, or the previous tailor has already compromised the shoulder seam, we will tell you. We would rather tell you upfront that it cannot be done properly than take your money for a result you won't like.
A cheap tailor will never turn down your money. They will promise you the world, take the KSh 1,500, and hand you back a ruined jacket. We will give you the truth, even if it costs us the sale. That is the FitFix standard.
Send us a photo of the jacket on WhatsApp, including a close-up of the shoulder from the front and back. We will tell you exactly what is possible, how much it will cost, and whether it is worth doing. Free pickup across Nairobi if you decide to proceed.
WhatsApp Us NowYou are handing over a valuable garment for the most complex alteration in tailoring. Shoulder reduction is structural surgery. It is entirely reasonable to want to know exactly where your jacket is going, who is handling it, and how it will get back to you. This section is your complete guide to our physical location, our rider logistics, and how we serve every single estate in Nairobi.
If you are looking for a tailor in a glossy mall in Westlands or a boutique in the CBD, we are not that. Our workshop is located in the Industrial Area of Nairobi. This is a deliberate choice, and it is one of the reasons our quality is so high.
Mall rents in Nairobi are astronomical. A tailor operating out of a mall has to charge a premium just to cover the overhead, which often means cutting corners on the actual tailoring to maintain a profit margin. Worse, many mall tailors are just "fitting rooms"—they take your measurements, pin the garment, and then send it out to a factory floor in another part of town to be sewn by an anonymous worker. You never actually meet the person who alters your jacket.
Our Industrial Area workshop is a dedicated, fully equipped tailoring factory. It allows us to invest in the right machinery—industrial blind-stitchers, heavy-duty irons, professional tailor's hams, and specialized pressing tables. It allows us to keep our master tailor, David Ochieng, and his team on-site, working directly on your garments. It is a space built for precision, not for retail display. Because our overheads are lower, we can invest more time and labor into the actual shoulder reduction (like hand-setting the sleeve head and hand-trimming the canvas), while still offering competitive pricing.
Let’s be honest about Nairobi traffic. If you are working in the CBD, Upper Hill, or Westlands, your lunch break is precious. The idea of leaving your office at 1:00 PM, sitting in traffic on Waiyaki Way or Mombasa Road, finding parking, walking to a tailor, getting measured, and then doing it all again a week later to pick up the jacket is exhausting. Most people simply never get around to altering their jackets because the logistics are a nightmare.
This is why we pioneered the free door-to-door pickup model for suit alterations in Nairobi. We flipped the script. Instead of you fighting the traffic to come to us, we come to you.
When you send us a photo on WhatsApp and approve the quote, we dispatch a dedicated rider to your home or office. Our riders are trained specifically for handling high-value garments. They do not stuff your jacket into a duffel bag or a backpack. They arrive with a professional suit hanger and a breathable garment bag. Your jacket is hung up, protected, and transported directly to our Industrial Area workshop.
Once the shoulder reduction is complete, we press the jacket perfectly, hang it back on the hanger, put it in the garment bag, and deliver it right back to your door. You never have to leave your office. You never have to find parking. You never have to sit in traffic. We handle the entire logistical headache. It is the ultimate convenience for the modern professional.
The process is seamless. You message us on WhatsApp (0705 728 896). You share a photo of the jacket on a hanger and one of you wearing it, and tell us what needs altering. We give you a fixed quote. Once approved, we ask for your location and a convenient time window. We can collect from your receptionist, your security guard, or directly from you. We send you the rider's details so you know exactly who is coming. When the jacket is ready, we deliver it back and you pay via M-Pesa upon receipt. It is completely cashless and completely hands-off.
Nairobi is a city of neighborhoods, each with its own distinct culture, dress code, and tailoring needs. Because we offer free pickup and delivery everywhere, we have developed a deep understanding of what clients in different areas actually need.
The Corporate & Creative Hub: These neighborhoods are the heartbeat of Nairobi's professional class. From the corporate offices in Westlands to the vibrant creative agencies in Kilimani, our clients here need jackets that transition seamlessly from the boardroom to evening drinks.
We frequently reduce shoulders for clients who have bought a modern, slightly oversized suit jacket and realized it swallows their frame. For the strict corporate environments, we ensure the sleeve head is re-set perfectly so the jacket retains its sharp, professional line.
The Diplomatic & Luxury Tier: In these neighborhoods, the expectation is absolute perfection. Our clients in Gigiri (often diplomats or UN staff) and Runda (high-net-worth individuals) frequently bring us luxury jackets from Italian and British makers—Brioni, Zegna, Canali, Huntsman.
These jackets require a different level of expertise. A fully canvased jacket cannot be rushed. We ensure that when the shoulder is reduced, the internal canvas is hand-trimmed and the sleeve head is re-set by hand to preserve the "ease." Our riders are professional, discreet, and will work directly with your household staff or security.
The Financial District: Time is money in Upper Hill and the CBD. Professionals here work long hours, often in demanding corporate or legal environments. They do not have time to leave the office during the day to visit a tailor.
Our free pickup service is a lifesaver here. We coordinate with your executive assistant or receptionist to collect the jacket while you are in a meeting. We can handle the shoulder reduction of multiple blazers and suit jackets for the entire week's wardrobe in one pickup.
The Hardworking Core: We have a massive client base in Eastlands. Whether it's a young professional buying their first off-the-rack suit for a job interview, or a family preparing for a wedding, the need for quality tailoring is universal.
Our clients here often need us to reduce the shoulders on jackets that were bought slightly too wide. Because we offer free delivery, you don't have to worry about commuting from Embakasi to town to pick up your jacket. We bring it to your doorstep.
The Suburban Solution: More and more professionals are moving to satellite towns for space and affordability, but the commute to Nairobi for services can be brutal. Driving from Kitengela to town just to drop off a jacket and then driving back again is a nightmare.
Our riders are fully mobile. We cover Kikuyu and Ruaka in the West, Ongata Rongai in the South-West, and Syokimau, Mlolongo, and Kitengela in the South-East. We treat these areas exactly the same as the city center. Free pickup, free delivery, same high standard of tailoring.
Don't let your location stop you from looking your best. We pick up from your doorstep, anywhere in Nairobi. WhatsApp us today to schedule your free jacket pickup: 0705 728 896.
You don't need to fight the traffic. You don't need to find parking. You don't need to leave your office. Send us a photo on WhatsApp, and let us handle the rest. Free pickup and delivery across all of Nairobi.
Schedule Your Free Pickup NowMost people think of shoulder reduction as "take in the shoulder seam." That description misses the four other parts of the jacket that change when the shoulder changes. Structurally, a shoulder reduction involves five parts of the jacket, and each one has to be handled correctly. Here's what we look at before we take scissors to a jacket.
The shoulder seam runs from the collar down to the armhole, on top of the shoulder. On a well-made jacket, the seam sits exactly on the edge of the wearer's natural shoulder bone — not short of it, not past it. When the jacket's shoulders are too wide, that seam sits past the natural shoulder, which makes the whole jacket look oversized even if the body fits. Reducing the shoulder width means moving that seam inward by 1 to 2 centimetres. The old seam line, as noted above, may leave faint needle-hole marks inside the new seam. On dense wool, they close within a few days. On lighter cloth, they may not.
The sleeve head is the curved top of the sleeve where it joins the shoulder. On a well-made jacket it's set with deliberate "ease" — a small, uneven amount of extra fullness that lets the sleeve roll naturally as the wearer moves. Machine-set sleeve heads look flat by comparison. When we reduce the shoulder width, the sleeve head has to be removed entirely and re-set by hand at the new position. This is the single most time-consuming part of a shoulder reduction, and it's what separates a shoulder reduction that looks factory from one that looks altered. There is no shortcut for this step.
On any canvased jacket, there's a piece of horsehair canvas inside the shoulder that gives it shape. There's also usually a layer of padding — sometimes thin, sometimes substantial — that gives the shoulder its structure. When we reduce shoulder width, both have to be trimmed or reshaped. The canvas is hand-trimmed to match the new width. The padding is either re-cut (if it's a shaped horsehair pad) or replaced (if it's a bonded foam pad that can't be re-shaped). On a heavy-padded British-style jacket, this is a substantial piece of work. On a lightly padded Italian jacket, it's quick.
The armhole is the curved opening in the jacket where the sleeve is attached. When the shoulder width is reduced, the armhole has to move inward with it. On some jackets, the armhole can be re-cut to the new position cleanly. On others — especially jackets with hand-finished armholes and fragile cloth — re-cutting is not possible without leaving visible marks. We check this before agreeing to any shoulder reduction. If the armhole can't be adjusted cleanly, we tell the client the job isn't worth doing on that jacket, and we mean it.
Every wearer's shoulders slope at a slightly different angle. Some people have flat shoulders (almost horizontal), some have steeply sloping shoulders, and most are somewhere in between. A well-made jacket's shoulder slope matches the wearer's. On an off-the-rack suit, the slope is cut for an average and fits almost nobody exactly. Shoulder slope correction is a separate alteration from width reduction — it changes the angle of the shoulder line, not the width. On a canvased jacket, slope correction means re-shaping the shoulder canvas and re-setting the sleeve head at the new angle. Same time and skill as a width reduction, and often done at the same time if both are needed.
If a tailor quotes a shoulder reduction without asking about the armhole, the sleeve head, or the shoulder slope, they're about to do a job that will look right for a week and wrong for a decade. We'd rather ask five questions upfront than take on a job we can't finish properly.
Shoulder reduction is more sensitive to cloth than any other suit alteration, because the visible outcome depends on how well the needle holes close up after the seam moves. Here's our honest breakdown by cloth type, the same one we'd give you on WhatsApp before quoting.
The best cloth for shoulder reduction. Worsted wool is tightly woven, dense, and the fibres swell back after a needle passes through — which means the old shoulder seam holes close up within a few days. On a KSh 40,000 worsted suit, a shoulder reduction is genuinely invisible three weeks later. The trade-off is that worsted holds a press line — so when we re-shape the sleeve head over a ham, we have to be careful not to press a hard line into the cloth. We steam-press over a ham and let the sleeve head settle into its new curve naturally. This is the cloth we'd recommend shoulder reduction on above all others.
Open-weave wool cloths that breathe. Fresco is tightly twisted; hopsack is a looser basket-weave. Both have visible texture that distracts the eye from small marks at the old shoulder seam — which is helpful for shoulder reduction. The trade-off is that open-weave cloth doesn't swell back as much as tightly woven worsted, so needle holes from the old seam stay visible longer. On a fresco or hopsack jacket, we accept that the old shoulder line may show as a faint shadow for two to three months after the reduction. It usually fades to nothing after that. Send a close-up of the cloth before we start so we can tell you how visible the shadow will be.
The best cloth for hiding a shoulder reduction — because the brushed surface has a nap that distracts the eye from any seam marks. Flannel also has natural give, which helps the sleeve head settle into its new curve. The trade-off is that flannel shows wear faster than worsted at stress points (elbows, shoulders), so on a flannel jacket that's already been worn hard, the shoulder area may be thin before we even start. We check the fabric thickness at the shoulder before agreeing to a reduction. If it's already worn thin, a shoulder reduction will accelerate the failure.
The cloth of premium suits. Wool-silk blends give a slight sheen and beautiful drape; wool-cashmere blends are softer and warmer. Both are more delicate than pure wool and more expensive. On a wool-silk suit, needle holes are more likely to show after a shoulder reduction — silk doesn't swell back the way wool does. On a wool-cashmere suit, the cashmere content responds beautifully to steam but hates direct heat, so we work with a lot of steam and very little iron at the shoulder. On this tier, shoulder reduction should only be attempted if the client genuinely needs it — and the honest answer is sometimes that the small shadow at the old seam is a trade-off the client has to accept.
Common on entry-tier and mid-tier suits. The polyester content makes the cloth more resistant to wrinkling but less forgiving under a needle — poly fibres don't swell back like wool, so old seam holes are more visible after a shoulder reduction. On a poly-wool suit, the reduction is still possible but the old seam marks may never fully disappear. The other limitation is that poly-wool cloth can't take the same level of hand-shaping as pure wool — the sleeve head "ease" is more resistant to being hand-formed. This affects the final sleeve-head roll. On a poly-wool suit with a fused shoulder, shoulder reduction is often not worth doing — the cost approaches the value of the jacket.
We turn down shoulder reduction jobs every month. On a heavily padded British-style jacket with a shallow armhole, the reduction can't be done cleanly because the armhole can't be re-cut — the padding and canvas have been engineered to sit exactly where they are. On a suit jacket whose shoulder has already been re-set by a previous tailor (visible as a second row of needle holes at the shoulder seam), a second reduction moves into compromised cloth. On a pale-coloured lightweight summer suit, the old seam marks will show even after a year. If we can't do a job properly, we don't take the money. It's the same standard we hold on suit jacket lengthening.
If you don't know what your jacket is made of, send a close-up photo of the cloth and the inside label on WhatsApp. We'll identify the cloth and tell you straight what's possible.
Every price below includes free pickup and delivery anywhere in Nairobi. The quote we give on WhatsApp is the quote you pay — no changes after work starts. If a job turns out simpler than the guide suggests, we quote lower. If it turns out more complex, we ask before proceeding.
| Shoulder alteration | Why this price | Price (KES) |
|---|---|---|
| Shoulder width reduction — up to 1.5 cm per side | Shoulder seam moved inward, sleeve head re-set by hand, canvas trimmed, padding re-shaped. Four to six hours of hand-bench time. | KSh 3,500 |
| Shoulder width reduction — 1.5 to 2 cm per side | Same technique, more cloth removed. Armhole re-cut where possible. Maximum safe reduction on most suits. | From KSh 4,000 |
| Shoulder slope correction — flat or sloping | Shoulder canvas re-shaped, sleeve head re-set at the new angle. Same time and skill as width reduction. | KSh 3,500 |
| Shoulder padding reduction — lighten | Padding thinned or removed for a softer shoulder line. Common on Italian-style jackets. | KSh 2,000 |
| Shoulder padding removal — full | Full removal of padding for a natural shoulder line. On a fused shoulder, padding is replaced. | From KSh 2,500 |
| Shoulder pad replacement — new pad fitted | Old pad removed, new shaped horsehair pad sourced and hand-set at the correct curve. | KSh 2,500 |
| Blazer shoulder adjustment | Same technique as a suit jacket. Sports coats, tweed blazers, casual blazers. | KSh 3,500 |
| Double-breasted jacket shoulder reduction | Both shoulders reduced, front lapel roll preserved, button stance unchanged. More measurement work. | From KSh 4,500 |
| Full shoulder restructuring — width + slope | Both width and slope corrected in one job. Sleeve head re-set twice for the two corrections. | From KSh 4,500 |
| Armhole adjustment — included with shoulder work | Included in every shoulder reduction where the armhole can be cleanly adjusted. Standalone armhole work priced separately. | KSh 1,500 |
| Sleeve head re-set only — no width change | Correcting a poorly-set sleeve head without reducing the shoulder width. Specialist repair. | KSh 2,500 |
| Rush service — 48-hour turnaround | Subject to availability. Confirm on WhatsApp before relying on it. | + KSh 500 |
Bulk pricing available from two or more suits collected in one pickup — ask on WhatsApp for a group quote. Wedding parties, groomsmen sets and family wardrobes welcome.
Three shoulder corrections done in one pickup, on the jacket. Priced so you can see exactly what each piece of work costs and what the combined saving is.
Individually these jobs total KSh 9,000. The package price starts at KSh 6,500 — a saving of about 28%. If you only need some of the three jobs, we price each individually instead. Larger reductions, padding replacement and armhole re-cut are priced separately if needed.
Our workshop sits in Industrial Area, Nairobi — central, easy for a rider to reach from any direction. But you never need to think about that. Send a photo of the jacket on WhatsApp, tell us the estate you're in, and a rider collects within 24 hours on a suit hanger. Standard shoulder reductions take 5 to 7 working days because of the hand-work involved; full shoulder restructuring takes 6 to 8 working days. Rush turnaround in 48 hours is available for KSh 500, subject to availability. Free collection and delivery, every time, anywhere in the city. The estates we collect from most often are Runda, Kilimani, Westlands, Karen, Lavington, Parklands, Kileleshwa, Gigiri, Muthaiga and Upper Hill. We also cover the whole Eastlands side, and go as far south-east as Syokimau, Mlolongo and Kitengela.
If your estate isn't on that list, message us and we'll tell you straight whether the rider can reach you. Most weeks, yes.
Most clients message us with a vague description — "the shoulders feel too wide" or "the jacket slides off my shoulders." Here's a table that turns what you're seeing into the exact alteration you need — and tells you honestly whether it's achievable. If your symptom isn't listed, send a photo on WhatsApp and we'll tell you directly.
| What you're noticing | What's actually wrong | The fix | Price |
|---|---|---|---|
| Shoulder seam sits past your natural shoulder bone | Shoulder width 1–2 cm too wide per side | Shoulder width reduction — sleeve head re-set by hand | KSh 3,500 |
| Jacket looks boxy even though the chest fits | Shoulder padding too thick for a modern look | Shoulder padding reduction — lighten or remove | KSh 2,000 |
| Jacket slides off one shoulder when you move | Shoulder slope doesn't match your body — flat vs. sloped | Shoulder slope correction — canvas re-shaped, sleeve head re-set | KSh 3,500 |
| Collar gapes at the back of the neck | Shoulders too wide or slope wrong — pulling the collar | Shoulder width reduction, sometimes slope correction too | From KSh 3,500 |
| Sleeve twists when you move your arm | Sleeve head was poorly set, or shoulder reduction pulled it out of pitch | Sleeve head re-set by hand at correct pitch | KSh 2,500 |
| Sleeve head has a flat, machine-stitched look | Previous tailor machine-set the sleeve head without ease | Sleeve head re-set by hand with the correct ease | KSh 2,500 |
| Padding is worn, lumpy or uncomfortable | Original foam padding has compressed or shifted | Shoulder pad replacement with shaped horsehair pad | KSh 2,500 |
| Shoulders look "hard" and unnatural | Padding too firm — usually on fused jackets | Padding replacement with softer shaped pad | KSh 2,500 |
| Shoulder seam is visible as a line of needle holes inside the new seam | Previous shoulder reduction — old seam marks not closed | Assess — sometimes fixable with re-press, sometimes permanent | On quote |
| Armhole feels tight after a previous shoulder job | Armhole was reduced along with the shoulder | Assess if the armhole can be let out — sometimes not possible | On quote |
| Double-breasted jacket — shoulders too wide | Shoulder width 1–2 cm too wide per side, lapel roll to preserve | Double-breasted shoulder reduction — lapel roll preserved | From KSh 4,500 |
| Jacket looks unbalanced — shoulders fine, body wrong | Real problem may be body slimming, not shoulder work | Assess honestly — sometimes the fix is body work, not shoulders | On quote |
| One shoulder sits higher than the other (natural asymmetry) | Body asymmetry, not jacket fault | Asymmetric shoulder slope correction — one side different from the other | From KSh 4,000 |
| Vintage jacket with a wide shoulder line | Vintage cuts were wider than modern — the jacket is fine, the style is different | Assess honestly — sometimes shoulder reduction changes the whole character | On quote |
| Previous tailor said shoulders can't be reduced | They may be right — armhole has to be re-cuttable | We check the armhole before quoting. Honest answer either way. | On quote |
Every fix depends on the suit tier and the cloth. If your jacket is fused, half-canvased or full-canvased, worsted, fresco, flannel or poly-wool, we adjust the technique accordingly. Tell us the tier at the quote stage — it changes everything.
Half our WhatsApp inbox arrives in Kiswahili, a third in English, and the rest in the mix that only Nairobi speaks. These are the shoulder questions we see most often, answered the way we'd answer over the counter.
Ndio, lakini kwa limit. Kubana shoulders ya suit Nairobi inaanzia KSh 3,500 kwa 1–1.5 cm per side. Hii ni highest-skill alteration kwa suit — sababu sleeve head inafaa kuondolewa na kurudishwa kwa mkono, na canvas ndani inafaa ku-trim. Kama shoulders ni 2+ cm kubwa, sometimes jacket haiwezi kubeba reduction hiyo. Tuma picha ya shoulders mbili kutoka mbele na nyuma, na moja ya wewe umevaa jacket.
From KSh 3,500Yes — and this is one of the most satisfying alterations we do. Shoulder padding reduction Nairobi is KSh 2,000 kwa lightening, au KSh 2,500 kwa full removal with new pad. Tunafungua shoulder seam, tunaondoa au tunapunguza padding, kisha tuna-re-shape shoulder line. Kwenye Italian-style jackets, padding ni nyepesi and removal is quick. Kwenye British-style heavy padded jackets, tuna-replace na new shaped horsehair pad. Tuma picha ya shoulder close-up.
From KSh 2,000Hii inaweza kuwa moja ya mambo mawili: (1) jacket ina slope sawa lakini mwili wako una asymmetry (bega moja iko juu kidogo), au (2) jacket yenyewe ina slope moja tu kwa sababu ilifanywa vibaya. Shoulder slope correction Nairobi ni KSh 3,500 kwa standard, au KSh 4,000 kama tunafanya asymmetric correction (kila upande tofauti). Tuma picha ya wewe umevaa jacket kutoka mbele na nyuma — tutaona asymmetry mara moja.
From KSh 3,500Because the shoulder job takes four to six hours of hand-bench work — the sleeve head has to be removed and re-set by hand, the canvas trimmed by hand, the padding re-shaped over a ham. Sleeve shortening happens at the cuff end and leaves the sleeve head alone. Also, the shoulder work has a hard risk: if it goes wrong, the jacket is genuinely ruined. There is no un-doing a badly reduced shoulder. That's why the pricing reflects the time and the skill involved, not just the visible cloth movement.
Yes, and on a Zegna the shoulder work is done entirely by hand. Full-canvased shoulder reduction Nairobi starts at KSh 3,500. Tunare-set sleeve head kwa mkono, tunamatch original "ease" ya sleeve head (small unevenness ambayo machine haiwezi kufanya), tuna-trim canvas kwa mkono, na tuna-hand-finish kila seam. Inachukua siku moja, sometimes more. On a KSh 90,000 jacket, this is the alteration we're proudest of when it goes right. Tuma picha za jacket na inside front panel.
From KSh 3,500Sometimes yes, sometimes no — depends on the jacket. Shoulder reduction inahitaji armhole iweze kure-cut cleanly. Kwenye jacket yenye armhole ya hand-finished au cloth fragile, re-cutting inaweza kuacha marks visible. Kwenye jacket hiyo, tailor alikuwa sahihi. Lakini kwenye jacket yenye standard armhole construction, shoulder reduction inawezekana. Tuma picha ya armhole kutoka ndani ya jacket — sehemu ambapo sleeve inakutana na body — na tutakuambia ukweli.
Sometimes, but we're usually cautious. On a fused jacket the padding is often bonded foam that can't be re-shaped — we replace it instead of re-using it. The sleeve head is machine-set on most fused jackets, which means there's no hand-ease to preserve, so our re-set is quicker. But the real limit on a fused jacket is the armhole — it's often cut so tightly that re-cutting it moves the sleeve opening into a spot the arm doesn't want to go. On a fused suit under KSh 12,000, the shoulder reduction cost (KSh 3,500) approaches the value of the jacket. Send a photo and we'll tell you honestly whether it makes sense.
Ndio, lakini inachukua muda zaidi. Double-breasted shoulder reduction Nairobi inaanzia KSh 4,500 — sababu lapel roll inafaa kuhifadhiwa, button stance haibadiliki, na measurement work ni nyingi zaidi. Kwenye canvas front ya double-breasted, kila seam inafaa ku-fanywa kwa mkono. Tuma picha ya jacket front na moja ya shoulders mbili kutoka juu.
From KSh 4,500Yes. Blazer shoulder reduction Nairobi is KSh 3,500 — same technique as a suit jacket. Tweed na brushed cloth ni the best cloth for hiding shoulder reduction, kwa sababu nap ya cloth ina-distract jicho kutoka seam marks. Blazers za tweed mara nyingi zina armhole kubwa zaidi ya suit jackets, ambayo inafanya re-cutting rahisi. Tuma picha ya blazer flat na moja ya shoulder close-up kutoka ndani ya jacket.
KSh 3,5001.5 to 2 centimetres per side is the maximum safe reduction on a standard suit — 3 to 4 cm total. Beyond that, the armhole has to move so far inward that the sleeve ends up too narrow for the arm, and the chest panel no longer fits properly. On heavily structured jackets or ones with reinforced shoulders, the limit is often lower — sometimes just 1 cm per side. We measure the actual limit on every jacket before committing, and we tell you upfront if the jacket can only take a smaller reduction than you want. A smaller reduction that keeps the jacket wearable is better than a larger one that ruins it.
Kwa hali moja. Vintage jackets zina armhole design tofauti na modern — often smaller, more sculpted. Kama armhole ni ndogo sana, shoulder reduction haiwezekani cleanly. Lakini kama vintage jacket ni ya quality (Italian au British tailoring), shoulder reduction inaweza kufanya kazi vizuri. Tunakagua mambo matatu: armhole size, cloth condition (no moth damage at shoulders), na original seam construction. Vintage shoulder reduction Nairobi inaanzia KSh 3,500. Tuma picha za jacket nzima na close-ups za shoulders.
From KSh 3,500Ndio — no minimum order. Shoulder reduction pickup Nairobi works with one jacket or a full wardrobe. Same-day pickup inawezekana kama unatuma message kabla ya 3pm. Delivery ni bure Nairobi yote. Tunakuja na suit hanger — hatuingizi jacket kwenye bag. Kwa wedding parties au corporate batches, tunaweza kuchukua jackets zote kwa pickup moja na kuzirudisha labeled by name. Shoulder reduction inachukua 5–7 working days kwa sababu ya hand-work.
Free pickup, suits on hangersOf every alteration I do on a suit — sleeve shortening, body slimming, jacket length, trouser work — shoulder reduction is the one I say no to most often. Not because the work is beyond me. I've been doing shoulder reductions for fourteen years. I say no because the shoulder is the one part of a jacket that cannot be un-done. Every other alteration, if it goes wrong, can usually be corrected. Shoulder work can't. Once you've moved the shoulder seam inward, the old seam line is inside the new one. If the armhole has been re-cut and the sleeve head re-set wrong, there's no way to bring it back. The jacket is permanently compromised.
There are three specific situations where I turn the job down. The first is when the armhole can't be re-cut cleanly. Shoulder reduction moves the shoulder seam inward by 1 to 2 centimetres, which means the armhole has to move inward with it. On most suits, that's fine — the armhole is a machine-set circle that we can re-stitch at the new position. But on jackets with hand-finished armholes, or fragile cloth that marks easily, or a shallow armhole that's already close to the edge of the jacket body, re-cutting the armhole leaves visible marks on the surrounding cloth. On those jackets, the honest answer is that the shoulder reduction isn't worth doing. I'd rather tell the client that upfront than hand them back a jacket with visible marks at the armhole.
The second situation is when the client asks for more reduction than the jacket can take. Most jackets can only be safely reduced by 1.5 to 2 centimetres per side. Beyond that, the armhole has to move so far inward that the sleeve ends up too narrow for the arm, and the chest panel no longer fits properly around the body. On some heavily structured jackets, the limit is even lower — sometimes just 1 centimetre per side. When a client asks me to reduce their shoulders by 3 or 4 centimetres, I have to tell them honestly that the jacket can't take it. Sometimes they accept a smaller reduction and are happy with the result. Sometimes they decide not to have the alteration done at all. Either way, I'd rather they knew the limit before we started than found out after.
The third situation is when the cloth is too fragile or the previous alteration has already compromised the shoulder. Pale lightweight summer suits show old seam marks even after a year. Jackets that have already had a shoulder reduction attempted by a previous tailor have a row of needle holes at the original seam position — a second reduction moves into compromised cloth and shows both rows of holes. And on a suit jacket with moth damage along the shoulder, a shoulder reduction makes the damage more visible because the surrounding cloth is now doing more work. On those jackets, I explain the situation and I let the client decide. If they choose to go ahead anyway, we plan the work carefully together. If the honest answer is "don't do it," I say so.
The clients who get the best shoulder reductions from me are the ones who understand the trade-offs. On a KSh 40,000 worsted wool suit, the reduction is invisible three weeks later — the needle holes close, the sleeve head settles, the whole jacket looks like it was made for the wearer. On a pale lightweight summer suit, the old seam marks may stay faintly visible for a year. On a very heavily padded jacket, the reduction may not be worth doing. I don't hide these trade-offs. I tell the client what the jacket can take, what the risks are, and what the result will look like in six months. And then we decide together whether to go ahead. That's the standard — and it's the reason clients bring me their best jackets instead of their cheapest ones.
Fifteen questions, straight answers. If yours isn't here, WhatsApp us — we reply personally during working hours.
A shoulder reduction moves the shoulder seam inward by 1 to 2 centimetres and re-sets the sleeve head by hand. Both are delicate — the sleeve head has more hand-work than any other part of the jacket, and the canvas inside the shoulder has been trimmed and re-anchored. Here are the eight habits we teach every client when they collect a shoulder-reduced jacket.
After a shoulder reduction, the sleeve head needs seven to ten days to settle into its new curve. The hand-stitching relaxes slightly, the canvas inside the shoulder re-sets to the new shape, and the cloth around the new shoulder seam recovers its natural grain. Wear the jacket briefly during that week — try it on twice, stand in it for a few minutes — so the cloth adjusts to being worn at the new width. Don't wear it to an event until that week is done. On a heavy jacket, give it ten days. On a lightweight summer jacket, seven is fine.
After shoulder reduction, the entire weight of the jacket is supported by the shoulders that have just been re-set. On a thin wire hanger, or hanging from a single hook at the collar, the weight concentrates at a single narrow point at the neck — which stretches the newly re-set shoulder seam and can pull the canvas out of shape. Always use a wide wooden or padded hanger with a shaped shoulder. The hanger should support the full width of the jacket shoulder, not just a narrow strip. This is the single most important habit for protecting a re-set shoulder.
After shoulder reduction, the hand-set sleeve head and the re-anchored canvas need more recovery time than a factory jacket. The hand-stitching relaxes slowly after being worn — 24 hours minimum, ideally 48. Wear the same jacket three days in a row and the sleeve head stays compressed, the shoulder seam stays under load, and the whole shoulder area never fully relaxes. Rotate between two jackets — the shoulder-reduced one and another — and each one lasts roughly twice as long.
The shoulder seam collects dust more than any other seam on a suit because it's the highest point on the jacket. Dust works into the new shoulder seam and, over time, can make the seam line more visible. A soft clothes brush, used along the shoulder seam after every wear, removes dust before it settles. Brush in the direction of the grain — with the nap, then against, then with again. Two minutes per jacket. This is especially important in Nairobi during the July and August dust season.
Never press a shoulder-reduced jacket with a home iron. The re-set sleeve head has deliberate, hand-worked "ease" that a flat iron will destroy. The canvas inside the shoulder will flatten and lose its shape under direct heat. If the shoulder area looks wrinkled, hang the jacket in a steamy bathroom for ten minutes. The steam relaxes the cloth without pressing it flat. If the shoulder area genuinely needs a real press, bring it to us — we press over a rounded ham, which is the only safe way to press a curved shoulder line. We'll do this once for free on any jacket we've shoulder-reduced.
The sleeve head is where the sleeve joins the shoulder, and it's the part of the jacket that takes the most movement stress. After every few wears, glance at the sleeve head: does it still have a soft roll, or has it gone flat? Is the hand-stitching still even, or has a thread loosened? A single loose thread at the sleeve head is a KSh 500 touch-up today. Left for a month, it becomes a KSh 2,500 full sleeve head re-set. Sleeve head damage is always cheapest to fix the moment it appears — and on a shoulder-reduced jacket, the sleeve head is younger than the rest of the jacket, so it needs a bit more attention during the first year.
Wool shrinks when it gets wet and dries without being re-shaped. On a shoulder-reduced jacket, the shoulder area has more tension than the rest of the jacket — the canvas is doing more work, the sleeve head is under load. If the shoulder gets soaked in the rain and dries naturally, the wool can shrink back slightly, which pulls the shoulder seam and distorts the re-set sleeve head. Dry the jacket flat or on a wide hanger indoors — never near a radiator, never in direct sun. If the shoulder does get soaked, let it dry naturally, then bring it to us for a re-steam and re-shape, which we do free on any jacket we've shoulder-reduced.
A single loose stitch at the shoulder seam is a KSh 500 fix today. Left for three months, it becomes a KSh 2,500 sleeve head re-set. Left longer, the shoulder seam can start to gape and the whole shoulder reduction has to be re-done. Same for the sleeve head: a small pull at the sleeve head corner is a KSh 500 touch-up now, a KSh 2,500 re-set if you wait. The clients whose shoulder-reduced jackets last the longest are the ones who message us the moment they notice something small. Small fixes early always cost less.
Follow those eight habits and the shoulder reduction will hold its new shape for a decade. And when it does eventually need work — a sleeve adjustment, a lining refresh, a re-press — we're one WhatsApp message away. See our re-lining services and darning & invisible mending pages for the two most common suit jacket rescues.
We don't collect testimonials systematically. These are the ones that stayed with me — the jackets where the shoulder work really mattered.
"I bought a half-canvased SuitSupply jacket three years ago and never wore it properly because the shoulders were too wide — the seam sat a full two centimetres past my natural shoulder, which made the whole jacket look borrowed from a bigger man. I'd taken it to two Nairobi tailors and both told me shoulder reduction wasn't possible. David looked at it, opened the inside sleeve head, checked the armhole, and told me it could be done. He explained the whole job — the sleeve head would come out and be re-set by hand, the canvas would be trimmed, the padding reshaped. He said it would take six days and cost KSh 3,500. It took six days. When I collected it, I tried it on, and the shoulder seam sits exactly on the edge of my shoulder bone. I've worn it to every client meeting since. There is a faint line of needle holes just inside the new shoulder seam if you look for it, but honestly you have to know what you're looking at. On a KSh 35,000 jacket, KSh 3,500 is nothing."
"I inherited my father's Zegna suit from 1995 — full-canvased, hand-set sleeve heads, the whole nine yards. The shoulders were enormous on me. I was terrified to have it touched. David told me honestly that on a pale cloth, the old shoulder seam might stay visible as a faint line for a year or more. He also said he thought the reduction would be worth doing because the jacket was so well made. Six days later, the jacket fit me at the shoulders. The old seam marks are a very faint line just inside the new seam — my wife can't see them. On a KSh 90,000 vintage jacket, that's a small trade-off. He was honest about it upfront, which is why I trusted him with the jacket in the first place."
"My Italian wool-silk jacket had heavy padding that made my shoulders look like I was going into battle. I wanted the padding reduced, not removed — I still wanted some structure. David replaced the padding with a lighter shaped pad and re-set the sleeve head at the same time. The jacket still has structure, but the shoulder line looks natural now instead of hard. Total cost was KSh 4,500 for the padding replacement and sleeve head work, and it changed how the whole jacket reads. He didn't try to upsell me on a shoulder width reduction I didn't need. Just did the padding and the sleeve head. That's the kind of honesty that makes me a repeat client."
That's all it takes to start. Send a photo of the jacket on WhatsApp — jacket on a hanger, plus one showing the shoulder from the front, one from the back, and one of the sleeve head close-up (the inside of the shoulder where the sleeve meets the body). The sleeve head photo tells us whether the armhole can be re-cut cleanly and how much reduction is possible. Tell us the estate you're in and when you need it back. We'll reply with a fixed price or an honest "not worth doing." Free collection anywhere in Nairobi, on a suit hanger. Altered in Industrial Area by David personally. Delivered back to your door with a fit guarantee.
Mon–Sat, 8am–6pm · Free pickup across every Nairobi estate · Fit guarantee · Bulk pricing from 2 jackets
Also explore suit alterations, jacket lengthening, and blazer alterations.